Features:

• Dimensions Hub: 85 mm (W) x 91 mm (D) x 20 mm (H)
• Patient Leads: 39"
• PC Connection: 3 Meter Cable, DB9 Male
• 10 Lead Cable: 12 Patient Leads
• Electrode Connections: Either 4 mm Banana plug or Snap-On connectors
• Electrode Labeling: Abbreviations and colors to comply with either IEC or AAMI standards
• Display & Operating Console: Dependent on PC
• Weight: 9.9oz

Power Requirements:

• Power Source: Can be powered by the PC Serial port control lines in most cases, depending on the PC being used.
• Can draw extra power if necessary from a PC PS/2 port or an external mains adapter.
• Supply Voltage: 4-16 V DC
• Supply Current: <17 mA DC

Filters:

• Permanent:
  High Pass: 0.05 Hz 1st order
  Low Pass: 170 Hz 1st order
  Baseline Wander: Baseline reset by adaptive zeroing algorithm

User Selectable:

• Notch Filters: 50 Hz, 60 Hz (Mains Noise Rejection)
• Low Pass: 35 Hz (Muscle Artifact Filter)
• Report Capabilities: User selectable report formats
• Display: 800 x 600 minimum

Acquisition:

• Common Mode Rejection: -6odB (minimum)
• Leads Off Indicators: Connection status for each lead is shown on Recording ECG screen
• Gain/Sensitivity: 5,10,20 mm/m V
• Sweep Speed: 12.5 mm/5,25,50
• Input Range: +/- 6 mV
• Acquisition Sample Rate: 1000 Samples/Second
• Frequency Response: 0.05 to 175 Hz +/- 3 dB

Conforms to standards:

• Safety Standards: Complies with AAMI EC11; IEC601-1; IEC601-1-1; IEC601-1-1-2; IEC601-2-25
• Safety Defibrillation Protection: Patient leads are isolated from system and operator with 4kV protection

Conforms to standards:

• Warranty: Main System 3 years with return of warranty card;
  Sensors 90 days

System Requirements:

• Available Type II PC Card Slot, USB Port or RS232 Port with 128 byte minimum FIFO buffer;
• Windows 98/ME/2000/XP; a Windows supported printer.